1.
Remove the spotlight(s).
2.
Loosen the Allen screws on the upper and lower tube clamp using the suplied Allen key.
3.
Loosen the safety cotter and pull out the safety bolt on the lower extension tube.
4.
Loosen the safety screw on the lower tube clamp and slide the lower extension tube all
the way down.
5.
Tighten the safety screw on the lower tube clamp.
6.
Loosen the safety cotter and pull out the safety bolt on the upper extension tube.
7.
Loosen the safety screw on the upper tube clamp and slide the lower extension tube all
the way down.
8.
Tighten the safety screw on the upper tube clamp.
9.
Loosen the two safety screws on the crossbar mounting and detach the crossbar.
10. Loosen the safety screw on the slider to which the three feet are attached.
11. Fold up the feet of the tripod.
12. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
LST-310
15
