4K 8x8 HDMI Matrix Switcher-N
11
OUTPUT device(5).
Program Customized EDID data
:
Besides 10 kinds of embedded EDID, this product can program 3 kinds of customized
EDID data.
①
The EDID dial
switch should be make sure on the “1111” status.
②
Copy customized EDID data file (.bin) to the control device (e.g. a PC)
③
Running the RS232 control software, and then send the command
EDIDUpgrade[X], X is 12, 13, or 14, for example, send EDIDUpgrade[12].
④
According the prompt and send custom EDID data file.
⑤
When
prompt “Update success”, the custom EDID data are set successfully.
⑥
Send the command
EDID[1]B[12],
the 1 input channel can invoke this new
customized EDID data.
4.2.4.2 Via 4-pin EDID DIP switcher
Beside EDID can be managed via RS232 commands, MP-HD-88A-N boasts a 4-pin
EDID DIP switcher to manage EEID. Dial the switchers to invoke demanded EDID data.
Embedded EDID data
: 10 sets in total, the chart below illustrate the 10 Embedded
EDID data.
Custom EDID data
: max at 3 sets
The chart below shows switcher status for custom EDID No.12~14.
No.
Switcher
Status
EDID information
Embedded EDID data
1
0001
720P 2D 5.1CH
2
0010
720P 3D 5.1CH
3
0011
720P 2D 2CH
4
0100
720P 3D 2CH
5
0101
1080P 3D 5.1CH
6
0110
1080P 2D 5.1CH
7
0111
1080P 3D 2CH
8
1000
1080P 2D 2CH
9
1001
2160P 2D 5.1CH
10
1010
2160P 2D 2CH
Custom EDID data
12
1100
Customizable
13
1101
Customizable
14
1110
Customizable
Note:
1)
EDID information listed in the above chart is factory default data. Embedded
EDID data can be updated by sending command
UpgradeIntEDID[x].
