4K 8x8 HDMI Matrix Switcher-N
6
4.2.3 RS232 Communication Commands
1)
Case-sensitive.
2)
“[“, “]” in the commands are for easy recognition only and not necessary in real
operations. Other symbols including
“.”, “,”, “/”, “%”, “;”, “^”. are parts of the
commands.
3)
Feedbacks listed in the column
“Feedback Example” are only for reference,
feedbacks may vary according to different operations.
4)
Dial the EDID switcher to
“1111” before sending commands pertaining to software
EDID management (with grey background)
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
System Commands
/%Lock;
Lock the front panel buttons.
System Locked!
/%Unlock;
Unlock the front panel buttons.
System Unlock!
/^Version;
Inquire the firmware version
VX.X.X
/:MessageOff;
Turn off command feedback from the
com port. It will only show simple words
like
“SWITCH OK!”.
/:MessageOff;
/:MessageOn;
Turn on command feedback from the
com port.
/:MessageOn;
/:FeedbackON;
Enable command feedback on LCD
monitor on the front panel (default).
/:FeedbackON;
/:FeedbackOFF;
Disable command feedback on LCD
monitor on the front panel (default).
/:FeedbackOFF;
Operation Commands
Undo.
Cancel the previous operation.
Undo Ok!
Demo.
Switch to the “demo” mode, convert
input and output in turn like 1B1,
1B
2, …8B7, 8B8, 1B1… and so on .The
switching interval is 2 seconds.
Switch to normal mode by pressing any
front panel button or sending any other
command
Demo Mode
[x]All.
Transfer signal from input x to all
outputs
1 To All.
