4K 8x8 HDMI Matrix Switcher-N
7
Command
Function
Feedback Example
All#.
Transfer all inputs to corresponding
outputs, like 1->1, 2->2
…
All Through.
[x]#.
Transfer signal from input x to output x.
1 Through.
All@.
Switch on all outputs.
All Open.
[x]@.
Switch on output x.
1 Open.
All$.
Switch off all outputs, but except coaxial
outputs for digital audio
All Closed.
[x]$.
Switch off output x.
1 Closed.
[x]B[y1],[y2],[y3]
.
Transfer AV signal from input x to output
y1, y2, y3
1B2
BlackscreenON[
x].
Switch on input x.
BlackscreenON1.
BlackscreenOF
F[x].
Switch off input x.
BlackscreenOFF1.
Save[y].
Save the present operation status to
preset command y, y=0~11.
Save To F1
Recall[y].
Recall preset command y, y=0~11.
Recall From F1
Clear[y].
Clear preset command y, y=0~11.
Clear F1
EDIDG[x].
Get EDID data from output x and
display it on com port.
EDIDM[X]B[y].
Enable input x to learn the EDID data
from output y. If the EDID data is not
available, the matrix will set it to initial
EDID data.
EDIDM3B1
EDIDC[x]B[y].
Capture the EDID data of output x and
save it as No.y EDID, y=1~10,12~14
EDIDC3B1
EDIDExtract[x][y].
Invoke No.y EDID data saved through
COM port to input x, y=1~10,12~14
Pick up success
UpgradeSoftwar
eEDID[y].
Save the EDID data to No.y EDID,
invoke the EDID by sending command
EDIDExtract[x][y].
Please send the EDID
file
Upgrade success
EDIDUpgrade[x]
.
Upgrade the EDID data of input x
(x=1~8: upgrade the EDID of single
input; x=9: upgrade the EDID of all
inputs)
Send EDID file (.bin) within 10 seconds.
Please send the EDID
file
Upgrade success
UpgradeIntEDI
D[x].
Used for programing customized EDID
data x=12~14, please refer to
4.2.4
EDID Management
for more details.
Please
send
the
EDID file
