HistoDream EW
MM164-001-Operator Manual
30
available. Press ENTER to confirm.
THERMAL CONSOLE
ENABLED
Use the UP or DOWN keys to select ENABLED if the thermal module is
installed or DISABLED if it is not. Press ENTER to confirm.
After pressing ENTER on the last screen of the THERMAL CONSOLE, the unit automatically switches to the
operating screen.
2.11. Load wax
Pour 5kg of solid wax into the wax cavity.
2.12. HistoDream EW settings
HistoDream EW can be easily programmed.
You can program:
- The actual date and time (internal clock / calendar)
- The temperature in each zone
-The days and time when to automatically start up and shut down the unit
- Holidays: dates on which the unit does not switch on even if, according to the automatic cycle daily setting,
it should switch on (e.g. company closures, etc.)
2.12.1. Set date and time
From the operating screen, press the CLOCK SET key
, and the following screen opens:
TUESDAY
31-03-19
HH:MM:SS
11:15:48
The day of the week (in this example, Tuesday) flashes.
Use the UP or DOWN keys to change the day, if required, and press
ENTER to confirm your selection.
The first digit of the date then starts flashing.
Note that the date format may be DAY-MONTH-YEAR or MONTH-DAY-
YEAR depending on whether the European date format or the American
one was programmed; this depends on the setting, as described under
chapter 2.10 Operating settings.
Use the UP or DOWN keys to change the date, if required, and press
ENTER to confirm your selection.
Proceed this way to change all date and time settings.
The wax melting time depends on factors such as the wax melting point; the temperature
at which the wax cavity is set; whether the cavity is open or closed, and the room
temperature.
The standard melting time is about 3 hours.
If the display is in energy saving mode (backlight off), press the MANUAL MODE key to
switch the backlight back on in any screen.