Milennia HV-316, Owner'S Manual

Page: 9 / 17

Page 9 of 17 rev 103020 Millennia Media HV-316
Ælogic Operation
Millennia’s Ælogic remote control software is
intuitive. What follows is an in-depth description of
its available functions. Refer to Appendix for a list of
keyboard shortcuts.
Unit Status Window – The example screen above
shows a Unit Status window in which seven HV-316
units (112 channels) are connected to the remote
network. The Unit Status window displays an icon of
each HV-316 unit on the network. The status of each
HV-316 is represented by its icon’s color code, as
follows:
Red Icon – “Unit ID Has a Conflict with Another
Unit ” . If two or more HV-316s share the same Unit
ID number or IP address, their icons will turn red
and will show identical IDs or IP addresses until the
conflict is resolved.
Setting a Unit ID or IP address must be done locally
on each HV-316. Other errors could also cause a red
icon, such as over-temperature, power supply out of
range, other networking errors, etc.
Green Icon – “ Functioning Normally ” . Remote unit
functioning normally.
Flashing Green Icon – HV-3R only. “ Functioning
Normally, Local Mode” . Remote unit is functioning
normally but is in the local mode.
HV-3R only: if the unit is in Local mode when Ælogic
is started, it won’t appear. Be sure to change the
unit to Remote mode so the software can recognize
the HV-3R.
Purple Icon – “ Unit ID Is Offline” . A unit was
previously connected to the network and set to this
Unit ID but is missing from the network. It was
either turned off or the Ethernet was disconnected or
both.
Blue Icon – The Redundant Power Supply is
powering the unit and the internal power supply is
offline due to either failing or losing AC mains power.
Gray Icon – “Unit ID Is Inactive” . No unit is
connected to the network and set to this Unit ID.
Unit ID Conflict – If more than one unit has the
same ID number this warning will
appear. You must correct the
problem before you can continue.
Unit Status Dialog – Double left mouse click on
any icon brings up that unit’s Unit Status dialog box
displaying the following information:
1. Unit Functionality
2. 48v Monitor (HV-3R)
3. 24v Monitor (HV-3R)
4. 5v Monitor (HV-3R)
5. 3.3v Monitor (HV-3R)
6. Temperature
7. MAC Address
8. Firmware Version
9. Output Format
10. IP Address
11.
Split Gain Offset
Scene Window
Unit Status Window
Control Section