Instructions for the installer
8
3.2
Fitting the adjustable feet
Before turning the cooker over, we recommend removing all the parts that are not stably attached
to it, in particular the cooking hob grids and burners. To lighten the weight of the cooker, the
accessories inside the oven may also be removed, thereby preventing accidental damage during
the overturning operation.
The cooker is delivered with the feet removed. Before moving and hooking up the cooker, take the
feet from the packing and screw them onto the cooker. This can be done in one of two ways:
A
Lifting the cooker off the floor.
B
Laying the cooker on its back.
The
final regulation
of the feet to level the
cooker to the floor will be done
after the
gas and electric hook-ups have been
made.
Should it be necessary to drag the cooker,
screw the feet in completely and carry out the final
regulation only when the other operations are completed.
3.3
Fitting the backguard (only available on certain models)
•
Rest the backguard
A
on the back of the surface, making sure the holes are aligned.
•
Tighten the 4 screws
B
using a Phillips screwdriver.
Any yellowing of the steel over time, which is completely natural, in no way alters its original
characteristics. It can be removed using specific steel cleaning products.
