Instructions for the installer
10
3.4.2 Type of power supply
MODEL
POWER kW
COOKER 5 BURNERS (1 OVEN)
2,9
COOKER 6 BURNERS (2 OVENS)
3,9
MODEL
POWER
kW
CURRENT
DRAW (amps)
COOKER 5 BURNERS (1 OVEN)
2,9
12
COOKER 6 BURNERS (2 OVENS)
3,9
16
3.4.3 Replacing the electric cable
To replace the electric cable, it is necessary to access the terminal board. It is located on the back
of the appliance as shown in the figure.
To replace the cable, proceed as follows:
•
open the terminal board box;
•
unscrew the screw
A
that locks the cable;
•
loosen the screw contacts and replace the cable
with one of the same length that corresponds to the
specifications in the table in section “3.4.1 Electric
power cable section”;
•
the "
yellow-green
" earth wire must be connected to
the terminal
and must be approximately
20 mm
longer than the line cables;
•
the neutral "
blue
" wire must be connected to the
terminal marked with the letter
N
;
•
the line wire must be connected to the terminal
marked with the letter
L
.