a. Use the PROG button exit from programming mode window. Any changes made in the setting will be
prompted to confirm saving. The “SAVE SET” display will appear.
b. Use the UP or DOWN button to select “yES” or “no” symbols.
c. To exit without saving the new value, select “no” or else select “yES”. To confirm, press PROG button.
d. If select “yES”, the window display “SAVE” for few seconds to save new setting.
e. Then, meter will exit from programing mode to normal mode.
a. Press the NEXT and PROG buttons simultaneously until the password ID request window is displayed. Key
in the current password. Refer to Section 6.1 on how to do this.
b. After pressing the PROG button, the “nEw id” window will be displayed. At this stage, the user needs to key
in the new password. Use the UP or DOWN button to change the digit value and the NEXT button to shift to
next digit. Once confirmed, press the PROG button.
c. Next, the “SAVE SEt” will be displayed. Use the UP or DOWN buttons to toggle the ”yES“ and ”no“ symbols
to save the new password. Once confirmed, press the PROG button and the meter will return to normal
display mode.
