The power meter comes with factory default settings. These values may be changed by navigating to the
appropriate screens and entering new values. Use the instructions in the following sections to change the values.
a.
Press the PROG button to enter programming mode. The first number will blink to enter password.
b. Use the UP or DOWN button to change display value and the NEXT button to shift to next number.
c.
Press the PROG button to confirm and enter programming mode. Setup CT ratio will be display. If the
password is incorrect, the meter will return to normal mode.
d. To exit press the PROG button and display will return to normal mode.
6. Setting up
Default password is “0000”
