a. Scroll in programming mode until ”Scrl SEt“ is displayed using the UP or the DOWN button.
b. This function is to turn ON/OFF scroll mode. If turn on, when the display is idle the meter will shows each
window in normal mode base on the scroll delay setting time.
c. Press the NEXT button. The “PROG” symbol will blink. Use the UP or DOWN button to toggle “oFF” or “on”
symbols.
d.
Press the NEXT button to confirm the new setting.
e. To proceed next setting, press DOWN button.
f.
To exit programming mode, press the PROG button. The user will be prompted to confirm the saving of
settings if change is made. Refer Section 6.16.
Scroll setting default value is oFF
a. Scroll in programming mode until ”Scrl dELY“ is displayed using the UP or the DOWN button.
b. This function is to set time interval for scroll window.
c. Press the NEXT button. The “PROG” symbol will blink. Use the UP or DOWN button to set 1sec to 10secs
interval.
d.
Press the NEXT button to confirm the new setting.
e. To proceed next setting, press DOWN button.
f.
To exit programming mode, press the PROG button. The user will be prompted to confirm the saving of
settings if change is made. Refer Section 6.16.
Scroll delay time default value is 10 seconds.
