2.11
HT500 SET SMART ROOM THERMOSTAT SETUP
1.
Power on the device by using adapter which you received with HT500 SET. “1” number will be
seen on display. It means, HT500 SET is ready for smart setup.
Note:
Setup can't start without adapter connection.
2. Scan QR Code below via your smartphone. You can install HT500 SET mobile application from
Apple Store or Google Play to your smartphone with that code. (You may need
QR Code Reader
App
regarding to your phone's model and brand). Complete your membership by enter into the
mobile application which you downloaded.
3. You will receive confirmation mail after you completed signing up.
4. If you confirm the incoming mail, the application will automatically have directed to setup page.
5. Perform the instructions on the Setup page in order and complete setup.
At the following link, you can watch a video that describes in detail the procedure for installing the application and
synchronizing the thermostat:
https://www.youtube.com/watch?v=ZhYK3CQmx1U
or on the Mikoterm YouTube channel which you can reach
through our site
or by loading the following QR code:
Note
: in order to synchronize the thermostat with the home network, you must make sure that the frequency of the Wi-
Fi network is 802.11 b / g / n @ 2.4GHz. It is also important that the code for the home router with which the thermostat
is synchronized does not have characters and punctuation marks such as (= + _ #.!?, @% $ „/> <* -), but only letters or
numbers.
Note
: If you have started the thermostat synchronization process on one phone and you have not synchronized the
thermostat correctly, you cannot synchronize the thermostat on the other phone until you uninstall the application on
the previous one or synchronize the thermostat correctly.
Important
: there is only one administrator account for thermostat control and you can add 4 more users (the procedure
for adding users is described in chapter 3.6).
2.12
RECEIVER LED LIGHT COLOR EXPLANATIONS
Green
Modem synced with thermostat and Works properly.
Green Flashing
Pressed to receiver sync button and waiting for thermostat sync signal.
Red
Receiver has energy but no thermostat synced.
Red Flashing
Boiler shut down because no signal from thermostat more than 22 minute.
Orange
On Manual Mode.