2.6
HT500 SET SMART ROOM THERMOSTAT
2.7
HT500 SET Reset and Sync
Sync while setup:
Sync signal is sent to receiver if “ “ button is pressed for 4 seconds.
Sync while using the device:
First the device is setted to off-
mode by pressing “ ” button.
Then sync signal is sent to receiver if
“ ” button is pressed for 4 seconds.
Wi-Fi Reset while setup:
Device is reset by pressing “ ” button for 4 seconds. Thus new setup can start.
Wi-Fi Reset while using the device:
First the device is setted to off-
mode by pressing “ ” button. Device is reset by pressing “
” button for 4 seconds. Thus new setup can start.
“ ”, “ ”
Temperature Set Buttons:
Increasing or reducing the temperature while manual mode is active.
“ ”
Mode button:
Unlock keylock by pressing 2 seconds. Change the modes.
“ ”
ON/OFF:
Turn off the boiler and thermostat by pressing 4 seconds.