3.3
LOCATION MODE
On the smart location setting page, you can specify the distance
(circle radius) from your station (thermostat). The location mode
of the thermostat works so that when you enter within the circuit
you set by setting the distance, the thermostat will automatically
set the boiler one temperature and when you leave the circuit
another temperature. In the example in image 12, a radius of 5 km
is given, where when you enter the set circuit, the temperature set
by the thermostat to the boiler is 24
0
C, while when you leave the
circuit, the thermostat will set the boiler a temperature of 18
0
C.
NOTE
: in order for the location mode to work in addition to
the set parameters, you need to turn on the location on your
phone (image 13) and the location mode on the application
for mC HT500 SET (image 8).
3.4
PROGRAM MODE
To enter the settings for the program mode, you need to select the
program mode / program mode option in the main menu (image
10), after which the page for setting the program mode of the
thermostat will open - image 14. To set the program mode, first
select the day for which you want to make the settings (you can
also select several days), and then click on + (image 15). After that,
the option for setting the temperature opens - image 16. Set the
temperature and time, then confirm with save (image 17). After
saving the set values, you can perform an inspection - image 18. If
you want to delete the default values, press delete / delete, image
- 19, after which a window will open to select the day for which you
want to delete the settings - image 20. Select the day and confirm
remove - image 21.
NOTE
: in order for the program mode to function properly, it
is necessary to set a minimum of two temperature changes
in one day (image 18) and to set the program mode to be
switched on (image 7).
image 12
image 13
image 14
image 15