User’s manual for Repeater MRx01B Power
M0079A1A.doc
Id.-No. 151775
Page 23
10-March-00
The following figure shows the mounting position of the power supplies in the
MRx01B Power cabinet.
figure 2-9 Mounting position of power supplies
Power supplies can be equipped with a power socket, protected with two fuses. Each power
supply can be switched on or off by means of an external switch. The modules of the Repeater
are voltage free if all power supplies are switched off. The power socket, however, is still
provided with mains power.
F
Note:
The service connecter must not be used for anything else but
service devices with low power consumption, e.g. a Laptop.
See figure 2-10 ON / OFF position of external switch.
figure 2-10 ON / OFF position of external switch
F
Note:
To switch the whole Repeater voltage free, you have to remove the
fuses F1 and F2 on the screw terminal.
The power supply is factory-set and should not be changed.
