Permissible
humidity (opera-
tion)
15% – 90%, non-condensing
Note:
Do not expose the device to the maximum humidity of 90% for more than 96
hours.
Maximum oper-
ating altitude
above sea level
10,000 ft (20.67 Hg)
3000 m (700 hPa)
Number of fixed
programs
6
Number of fixed
training plans
5
Number of pro-
gram memories
Up to 200
Number of chan-
nels
10 output pulses in multiplex mode
Maximum peak
level of the
output voltage
150 V
The maximum peak level of the output voltage decreases due to the internal resistance
of the end stages with decreasing load impedance.
Pulse width set-
ting
50 μs – 400 μs in steps of 25 μs
Pulse rise setting 0.0 s – 1.0 s in steps of 0.1
Frequency set-
ting
2.0 Hz – 10.0 Hz in steps of 0.5; 10.0 Hz – 150.0 Hz in steps of 1.0
Pulse pause set-
ting
0.0 s – 1.0 s in steps of 1.0; 1.0 s - 10.0 in steps of 0.1
Pulse time set-
ting
1.0 s – 10.0 s in steps of 0.1
Time specifica-
tion setting
0.5 min – 5.0 min in steps of 0.5; 5.0 min – 30.0 min in steps of 1.0; 30.0 min – 90.0 min
in steps of 2.0
Effective current
density per cm²
of electrode area
≤ 0.48 mA r.m.s./cm² (at 500 ohm)
Effective output
value
Ueff = 15 V at 500 ohm (30 mA)
Assuming a load impedance of 500 ohm, this produces a current intensity level of
30 mA r.m.s. The output voltage does not contain any DC component.
Output waveform
– bipolar
Technical data
2021-07-28
miha-bodytec II EMS training device
36
