Migomag SIM 200 LCD
Model No ASIM200LCD
38
Service, Maintenance, Transportation and Storage
The welder needs regular maintenance as following: Periodically clean dust, dirt, grease,
etc. from your welder. Every six months, or as necessary, remove the cover panel from
the welder and air-blow any dust and dirt that may have accumulated inside the welder.
Replace power cord, ground cable, ground clamp, or electrode assembly when damaged
or worn.
Minor and Routine Maintenance
Store in a clean dry facility free from corrosive gas, excess dust and high humidity.
Temperature range from 10F120°F and the relative humidity not more than 90%.
When transporting or storing the welder after use, it is recommended to repack the
product as it was received for protection. Cleaning is required before storage and you
must seal the plastic bag in the box for storage.
Warning Label
Warranty
Power Source
Warranty
Period
Labour
Power source only
3 Years
2 Years
Accessories
Warranty
Period
MIG & TIG torch, electrode holder lead, earth lead, gas hose, regulator
and any other accessories
6 Months
MIG & TIG torch consumable items
NIL
