12
Connection and start-up
Adjust pressure
1. Hard (e.g. CrNi)
2. Medium ( e.g. AlMg/CuSi)
3. Soft (e.g. AlSi)
Exchange wire inlet nozzle
- Unscrew hexagon nut by using an open-ended spanner
(spanner size 10mm [.394.in.])
- Unscrew and remove wire inlet nozzle by using slotted
screwdriver.
Technical data
Type of Voltage Motor Pull: DC direct voltage
Elektrode Polarity:
usually positiv
Type of torch use:
manual
Types of wire:
commercially available round wires
Shield Gas (DIN EN 439):
CO
2
and mixed gas M21
General torch data according to EN 60974-7
Type:
FKS 400W
Cooling: Water
Load: CO
2
400 A
M21 350 A
Duty cycle:
100 %
Wire-Ø:
0.8-1.6 mm
Gas flow:
10-20 l/min
Flow temp. max.:
40°C
Cooling data:
Flow:
min. 1 l/min
Flow pressure:
min. 2.0 bar
max. 3.5 bar
