16
17
CWF menu PI setup
1
0
T
urn the potentiometer
untill the display shows
3 strokes
Press the button
repeatedly untill
LEDs
for
slope-up & slope-down
are lit
The display uses
3
cifres to show
chosen CWF &
program
The function can be left
without making changes
by pressing the
A
button
Press the
A
button.
The display shall
show welding
current
How many CWF-
units are used
1
2
Use
welding
program
1.
Press
the
program
key
and
turn
the
potentiometer
until
the
display
shows
1
and
then
release
the
key
Make a setup of
CWF no. 1 and
then go on with
this point
1.01 - 1.20: CWF 1 chosen and it is possible to choose
program between 01 - 20
Choose 1.01
0.00 - No CWF chosen and no welding program position chosen
Choose 2.01
T
urn the potentiometer
untill the display shows
3 strokes
Setting up is done on the power source
Have you remembered?
Activate the CWF function
on the power source
Keep the button down untill
the display shows 3 strokes
T
urn the potentiometer until
the display shows Fdr
.
Press the
A
button.
The
display shall show 3 strokes
T
urn the potentiometer
untill
Act. is displayed
Press the
A
button to gain
access to the function
T
o deactivate the protocol,
the menu switch shall be kept
down whilst the potentiometer
is turned
The display shall
change from 1 to 0.
Finish by pressing
the
A
button
The protocol for CWF is activated.
If there is no CWF unit connected
to the power source, it reports
error during triggering
The display shows
one of 2 items
Factory setting
The protocol for CWF is
deactivated.
The machine
cannot
“see”
the CWF
T
o activate the protocol, the menu
switch shall be kept down whilst
the potentiometer is turned
The display shall
change from 0 to 1.
Finish by pressing
the
A
button
The display
shows
Act.
Press the
A
button.
The display shall show Fdr
.
Press the
A
button.
The display shall show
welding current
Set the power source
to use the CWF
By turning
the potentiometer it
is possible to choose
between following
options
0.00 - No CWF chosen and no welding program position chosen
2.01 - 2.20: CWF 2 chosen and it is possible to choose
program between 01 - 20
Press the
A
button.
The display shall
show welding
current
The function can be left
without making changes
by pressing the
A
button
The display uses
3
cifres to show
chosen CWF &
program
Press the button
repeatedly untill
LEDs
for
slope-up & slope-down
are lit
By turning
the potentiometer it
is possible to choose
between following
options
Use
welding
program
2.
Press
the
program
key
and
turn
the
potentiometer
until
the
display
shows
2
and
then
release
the
key
Rev: 6
23-10-2010
CWF menu - PI setup
Arthur Nielsen
Page 2/2
Migatronic
A/S
