Miele WXI 860 WCS Page 26 Operating And Installation Instructions Download

Page: 26 / 112

2. Selecting a program

3. Selecting programs via the
MobileStart



program selector

position and the Miele@mobile app

Tip:

In order to use

MobileStart



, the

washing machine must be logged on to
the WiFi network and

Remote control

must be switched on.



Turn the program selector to the

MobileStart



position.

The following appears in the display:



Load laundry, close the door and press

“Start”. Appliance can be remotely
controlled



Follow the instructions in the display
and start the program.

The following appears in the display:



MobileStart 

The washing machine can now be
operated with the Miele@mobile app.

Summary of Contents for WXI 860 WCS

















































































































Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands

Miele WXI 860 WCS, Operating And Installation Instructions

Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands