Miele WXI 860 WCS Page 62 Operating And Installation Instructions Download

Page: 62 / 112

Cleaning and care

Cleaning the siphon and the





compartment channel

Liquid starch results in clogging. The
siphon in the





compartment no

longer works and the compartment
can overflow.
Clean the siphon particularly
thoroughly after using liquid starch a
few times.

Remove the siphon from the



compartment and clean under warm
running water. Clean the siphon tube
in the same way.

Refit the siphon.



Clean the fabric softener channel with
a brush and warm water.

Cleaning the detergent dispenser
drawer housing



Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer housing.



Replace the detergent dispenser
drawer.

Tip:

Leave the detergent dispenser

drawer slightly open to allow it to dry.

Summary of Contents for WXI 860 WCS

















































































































Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands

Miele WXI 860 WCS, Operating And Installation Instructions

Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands