Before using for the first time
20
Push the
UltraPhase 1
detergent
cartridge into
compartment 1
until it
locks into position.
Settings for compartment
The UltraPhase 2 values are pre-set in
the standard default settings.
After the cartridge has been pushed in,
the display message switches to:
Agent for
OK
Confirm with the
OK
sensor button.
Miele UltraPhase 2
OK
Confirm with the
OK
sensor button.
The dispensing quantity for
UltraPhase 2 for
(hardness level I)
is pre-set.
Per load
OK
ml
36
Confirm the pre-set value with the
OK sensor button. If you want to
change this value, use the
sensor buttons and confirm with
the
OK
sensor button.
UltraPhase 2
Hardness level I
36 ml
Hardness level II
45 ml
Hardness level III
54 ml
The following will appear in the display:
Insert
Remove the cover from the detergent
cartridge.
