Frequently Asked Questions
Fault message after the end of the program
Problem
Possible cause and solution
Check dosage
Excessive foam has built up during washing.
With TwinDos, check the dosage amount set.
Reduce the amount set in 10% increments.
Use less detergent next time and follow the
manufacturer’s instructions on dosage given on
the packaging.
Sanitize info: Run a
high temp. program
or the “Clean Ma-
chine” program
When washing, a wash program using a temperature
above 140°F (60°C) has not been run for a long time.
Turn the program selector to
Additional programs
/
.
Touch the
sensor buttons until
Maintenance
appears in the display.
Touch the
OK
sensor button.
The following appears in the display:
Clean Machine
Touch the
OK
sensor button.
Run the
Clean Machine
program using a universal
powder detergent.
The washing machine is cleaned which prevents
bacteria and odor buildup.
The messages will appear at the end of the program and when the washing
machine is switched on, and need to be confirmed with the
OK
sensor button.
67
