Settings
88
Gentle action
With gentle action activated, drum
rotation is reduced. In this way, lightly
soiled items can be washed more
gently.
Gentle action can be activated for the
Normal
and the
Wrinkle-free
programs.
Gentle action is switched off in the
factory setting.
Reduce temp.
At high altitudes water has a lower
boiling point. Miele recommends
activating the reduce temperature
setting at altitudes of or above
2,000 m to prevent water from boiling.
The maximum temperature is reduced
to 80 °C, even if a higher temperature
is selected.
The temperature reduction setting is
switched off in the factory setting.
Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent wash
results. The water consumption will be
increased.
The function is switched off in the
factory setting.
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when a
Normal program with a temperature of
70 °C or higher is selected.
Suds cooling should be activated:
– To prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– Where the drainage pipes do not
comply with DIN 1986.
Suds cooling is switched off in the
factory setting.
Low water pressure
If the water pressure is below
14.5 psi/100 kPa, the program will be
cancelled and the fault message
Drainage See
will appear.
If the on-site water pressure cannot be
increased, activating this function will
prevent the program from being
cancelled.
Low water pressure
is switched off in
the factory setting.
Summary of Contents for WWH 660
Page 94: ......
