Miele WWH 660 Operating Instructions Manual Download Page 50

Page: 50 / 96

Changing the program sequence

Child lock

The wash program cannot be
interrupted unintentionally.

Activating the child lock



Touch the

Start/Stop

sensor button.

The following will appear in the display:

Cancel Program











Scroll up the list with the



sensor

buttons:

Activate lock











Touch the

sensor button.

Deactivating the child lock



Touch the

Start/Stop

sensor button.

The following will appear in the display:

Deactivate lock











Touch the

sensor button.

Adding or removing laundry

Laundry can only be added or
removed at the beginning of a wash
program.

If the following message no longer
appears in the display then it is no
longer possible to add items of
laundry.



Press the

Start/Stop

button.

The following will appear in the display:

Cancel Program











Touch the



sensor buttons until

the following appears in the display:

Add laundry











Touch the

sensor button.

The program will stop and the door will
unlock.



Pull open the door.



Add or remove items.



Close the door.



Touch the

Start/Stop

sensor button.

The wash program will continue.

Summary of Contents for WWH 660

































































































Search results

Summary of Contents for WWH 660

Reviews:

Related manuals for WWH 660

Brands by name

Popular brands

Miele WWH 660, Operating Instructions Manual

Search results

Summary of Contents for WWH 660

Reviews:

Related manuals for WWH 660

Brands by name

Popular brands