Initial commissioning
22
5. Starting the calibration
program
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the
Normal
program
must
be run without laundry and without
detergent.
No other programs can be started until
calibration has been carried out.
The following message appears in the
display:
Open and run "Normal", "Hot+" without
laundry.
Touch the
sensor button until the
OK
sensor button lights up and
confirm this with
OK
.
1:40
Hot+
OK
Max
Turn on the tap.
Touch the
Start/Stop
sensor button.
The washing machine calibration
program has started. It will take
approximately 2 hours.
At the end of the program the following
message will appear in the display:
Set up complete
Take hold of the door and pull it
open.
Useful tip:
Leave the door slightly open
to allow the drum to dry.
Turn the program selector to the
position.
Summary of Contents for WWH 660
Page 94: ......
