Frequently Asked Questions
General problems with the washing machine
Problem
Possible cause and remedy
Strange pump noises
can be heard.
Not a fault.
Slurping noises occur at the start and end of the
pump sequence as a normal part of operation.
Fabric softener is not
completely dispensed
or too much water
remains in the
compartment.
The siphon tube is not correctly positioned or
clogged.
Clean the siphon (see "Cleaning and care –
Cleaning the detergent dispensing drawer").
The display is dark.
The display has switched off automatically to save
energy (Standby mode).
Press any button. Standby will end.
At the end of the
program there is still
liquid in the capsule.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
Not a fault.
For technical reasons, a small amount of water will
remain in the capsule.
There is water next to
the capsule in the fabric
softener compartment
The
sensor button was not activated or an empty
capsule was not removed at the end of the last wash
cycle.
Activate the
sensor button when a capsule is
next used.
Remove and then dispose of the empty capsule at
the end of each wash cycle.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
The display is in a
different language.
A different language has been selected in "Settings,
Language
".
Set the language you want. The flag symbol will
guide you.
63
Summary of Contents for WWH 660
Page 94: ......
