Miele WMR561WPS Operating Instructions Manual Download Page 63

Page: 63 / 112

Detergent

Fabric conditioner and liquid
starch at the end of the
programme

You can dispense fabric conditioner
either by using automatic dispensing or
via the detergent dispenser
compartment.

Automatic dispensing

One of the automatic dispensing
containers must be filled with fabric
conditioner.



Touch the

Dos



sensor.



Activate the appropriate container.

Fabric conditioner will be dispensed in
the last rinse.

Manual dispensing



Add the fabric conditioner or liquid
starch to the



compartment or

insert the appropriate capsule.

not exceed the maximum level
mark.

The agent will be automatically
dispensed in the last rinse. At the end
of the programme a small amount of
water will remain in the



compartment.

If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.

Summary of Contents for WMR561WPS

















































































































Search results

Summary of Contents for WMR561WPS

Reviews:

Related manuals for WMR561WPS

Brands by name

Popular brands

Miele WMR561WPS, Operating Instructions Manual

Search results

Summary of Contents for WMR561WPS

Reviews:

Related manuals for WMR561WPS

Brands by name

Popular brands