Options
49
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Please note the load information
in the display. Small loads give a better
result.
The garments must be suitable for
drying in a tumble dryer
and
suitable for ironing
.
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Stains
In order to clean stained laundry more
effectively you can choose from a list of
various types of stains. The wash
programme will then adapt to the types
of stains selected. You can select a
maximum of three stains per wash
cycle.
Further options
Soak
For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and
5 hours in 30 minute increments can be
chosen for the soak process. See
"Settings" for more information.
The factory default setting is
30 minutes.
Rinse hold
The laundry is not spun after the final
rinse and remains in the final rinse
water. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Water plus
The water level in the wash and rinse
stages is increased.
You can select by how much the water
level is increased, see "Settings, Water
plus level".
Extra rinse
An additional rinse cycle is carried out
to give a better rinse result.
Summary of Contents for WMR561WPS
Page 110: ......