Miele WKR571 Operating Instructions Manual Download

Page: 63 / 112

Detergent

Fabric conditioner and liquid
starch at the end of the pro-
gramme

You can dispense fabric conditioner
either by using automatic dispensing or
via the detergent dispenser compart-
ment.

Automatic dispensing

One of the automatic dispensing con-
tainers must be filled with fabric condi-
tioner.



Touch the

Dos



sensor.



Activate the appropriate container.

Fabric conditioner will be dispensed in
the last rinse.

Manual dispensing



Add the fabric conditioner or liquid
starch to the



compartment or in-

sert the appropriate capsule.

Do not

exceed the maximum level mark.

The agent will be automatically dis-
pensed in the last rinse. At the end of
the programme a small amount of water
will remain in the



compartment.

If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.

Summary of Contents for WKR571

















































































































Search results

Summary of Contents for WKR571

Reviews:

Related manuals for WKR571

Brands by name

Popular brands

Miele WKR571, Operating Instructions Manual

Search results

Summary of Contents for WKR571

Reviews:

Related manuals for WKR571

Brands by name

Popular brands