Miele WKR571 Operating Instructions Manual Download

Page: 66 / 112

Cleaning and care

Cleaning the siphon tube and the
channel

Liquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon
tube particularly thoroughly after us-
ing liquid starch a few times.



Clean the siphon.

1. Remove the siphon from the



com-

partment and rinse under hot running
water. Clean the siphon tube at the
same time.

2. Replace the siphon.



Clean the fabric conditioner channel
with a brush and hot water.

Cleaning the detergent dispenser
drawer housing



Use a bottle brush to remove deter-
gent residues and limescale from the
jets inside the detergent dispenser
drawer housing.



Replace the detergent dispenser
drawer.

Tip:

Leave the detergent dispenser

drawer slightly open to allow it to dry.

Summary of Contents for WKR571

















































































































Search results

Summary of Contents for WKR571

Reviews:

Related manuals for WKR571

Brands by name

Popular brands

Miele WKR571, Operating Instructions Manual

Search results

Summary of Contents for WKR571

Reviews:

Related manuals for WKR571

Brands by name

Popular brands