background image

Warning and Safety instructions

9

 

The electrical safety of this washing machine can only be guaran-

teed when correctly earthed. 
It is essential that this standard safety requirement is met. If in any
doubt, please have the wiring system of the building tested by a
qualified electrician. 
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).

 

Do not connect the washing machine to the mains electricity sup-

ply by a multi-socket adapter, extension lead or similar. These do not
guarantee the required safety of the machine (fire hazard due to the
risk of overheating).

 

Faulty components must only be replaced by genuine Miele ori-

ginal spare parts. Only when these parts are fitted can Miele guaran-
tee the safety standards of the machine.

 

The electrical socket must be easily accessible after installation so

that the machine can be disconnected from the electricity supply if
necessary.

 

Unauthorised repairs could result in unforeseen dangers for the

user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the guar-
antee.

 

If the electrical connection cable is faulty it must only be replaced

by a Miele authorised service technician to protect the user from
danger.

Summary of Contents for WKR571

















































































































Reviews: