Miele WDA 210 WPM Operating Instructions Manual Download Page 7

Page: 7 / 72

Warning and Safety instructions

Safety with children



Young children must not be allowed to use this appliance.



Older children may only use the appliance when its operation has

been clearly explained to them and they are able to use it safely, rec‐

ognising the dangers of misuse.



Cleaning work may only be carried out by older children under the

supervision of an adult.



Please supervise children in the vicinity of the washing machine

and do not let them play with it.



For machines with a 'porthole' door, remember that the porthole

glass will be hot when washing at very high temperatures. Do not let

children touch it.

Technical safety



Please observe the instructions in "Installation and connection"

and "Technical data".



Before setting up the washing machine, check it for any externally

visible damage. Do not install or use a damaged machine.



Before connecting the washing machine, ensure that the connec‐

tion data on the data plate (fuse rating, voltage and frequency)

matches the mains electricity supply. If in any doubt, consult a quali‐

fied electrician.

Summary of Contents for WDA 210 WPM









































































Search results

Summary of Contents for WDA 210 WPM

Reviews:

Related manuals for WDA 210 WPM

Brands by name

Popular brands

Miele WDA 210 WPM, Operating Instructions Manual

Search results

Summary of Contents for WDA 210 WPM

Reviews:

Related manuals for WDA 210 WPM

Brands by name

Popular brands