Miele WDA 210 WPM Operating Instructions Manual Download Page 13

Page: 13 / 72

Operating the washing machine

Display

See the next page for more informa‐

tion.

Start

button



– For selecting Delay start.
– For starting the wash programme.

Extra option buttons

For selecting Extra options. Use the

upper button to select

Short

Pre-

wash

Soak

. Use the lower button

to select Water plus.

Indicator light on = option selected

Indicator light off = option not selec‐

ted

Spin button

with spin speed indica‐

tor lights

For selecting the spin speed.

Programme selector

For selecting the wash programme

and temperature for that programme.

The programme selector can be

turned clockwise or anti-clockwise.

Programme sequence indicator

lights

Show which stage of the programme

has been reached.

Check / Fault indicator lights

– See "Problem solving guide".
– The PC check light is also used by

service technicians to run diagnos‐

tic checks and may be used to up‐

date programming data in the fu‐

ture.



button

For switching the washing machine

on and off.

To save energy, the washing machine

will switch off automatically 15 mi‐

nutes after the end of the pro‐

gramme/anti-crease phase or after

being switched on if no other selec‐

tion is made.

Door

button

For opening the door.

Summary of Contents for WDA 210 WPM









































































Search results

Summary of Contents for WDA 210 WPM

Reviews:

Related manuals for WDA 210 WPM

Brands by name

Popular brands

Miele WDA 210 WPM, Operating Instructions Manual

Search results

Summary of Contents for WDA 210 WPM

Reviews:

Related manuals for WDA 210 WPM

Brands by name

Popular brands