background image

Problem solving guide

44

General problems with the washing machine

Problem

Cause and remedy

The machine shakes
during the spin cycle.

The machine feet are not level.

Level the machine and adjust the feet correctly.

The laundry has not
been spun properly and
is still wet.

The machine detected an imbalance during the final
spin cycle and reduced the spin speed automatically.

Include both large and small items in the load as
this will give better distribution during spinning.

Strange pump noises
can be heard.

This is not a fault.
These slurping noises occur at the end of the pump
sequence as a normal part of operation.

Large amounts of deter-
gent residue remain in
the detergent dispenser
drawer.

The water pressure is too low.

Clean the water inlet filter.

It may be useful to select the 

Water plus

 extra op-

tion.

Powder detergent used in conjunction with water
softeners tends to become sticky.

In future, add washing powder into the dispenser
drawer first, and then add the water softener.

Fabric conditioner is not
completely dispensed
or too much water re-
mains in the 

 com-

partment.

The siphon tube is not correctly positioned or is
clogged.

Clean the siphon, see "Cleaning and care - Clean-
ing the detergent dispenser drawer".

Summary of Contents for wda 201









































































Reviews: