Miele wda 201 Operating Instructions Manual Download Page 32

Page: 32 / 72

Changing the programme sequence

Cancelling a programme

You can cancel a programme at any
time after it has started:



Turn the programme selector to

Fin-

ish

The water will drain away. The pro-
gramme is cancelled as soon as the

Anti-crease/Finish

indicator light comes

on and



appears in the display.

Selecting a different programme after
cancelling the programme



Switch the washing machine back on
with the



button.



Check that there is still detergent in
the dispenser drawer. Add more de-
tergent if necessary.



Turn the programme selector to the
programme you want and start the
programme by pressing the

Start

but-

ton.

Removing laundry after cancelling
the programme



Turn the programme selector to

Drain/Spin

Tip:

Select an appropriate spin speed.



Press the

Start

button.

The suds will be pumped away.



Press the

Door

button to open the

door.

Interrupting a programme



Switch the washing machine off with
the



button.



Switch the washing machine back on
with the



button to continue with

the same programme.

Changing a programme

After the start of a programme it is not
possible to select a different pro-
gramme.

Temperature

It is possible to select a different tem-
perature up to 6 minutes after the pro-
gramme has started.

Spin speed

It is possible to change the spin speed
at any time.

Extra options

It is possible to select or deselect the

Water plus

extra option up to 6 minutes

after the programme has started.

Summary of Contents for wda 201









































































Search results

Summary of Contents for wda 201

Reviews:

Related manuals for wda 201

Brands by name

Popular brands

Miele wda 201, Operating Instructions Manual

Search results

Summary of Contents for wda 201

Reviews:

Related manuals for wda 201

Brands by name

Popular brands