Miele wda 201 Operating Instructions Manual Download Page 13

Page: 13 / 72

Operating the washing machine

Display

See the next page for more informa-
tion.

Start

button



– For selecting delay start.
– For starting the wash programme.

Extra option buttons

For selecting extra options. Use the
upper button to select either

Short

Pre-wash

Soak

. Use the lower but-

ton to select Water plus.
Indicator light on = option selected
Indicator light off = option not selec-
ted

Spin button

with spin speed indic-

ator lights
For selecting the spin speed

Programme selector

For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.

Programme sequence indicator
lights

Show which stage of the programme
has been reached.

Check / Fault indicator lights

– see "Problem solving guide".
– The PC check light is also used by

service technicians to run dia-
gnostic checks and may be used
to update programming data in the
future.



button

For switching the washing machine
on and off.
To save energy the washing machine
will switch off automatically 15
minutes after the end of the pro-
gramme/anti-crease phase or after
being switched on if no other selec-
tion is made.

Door

button

For opening the door.

Summary of Contents for wda 201









































































Search results

Summary of Contents for wda 201

Reviews:

Related manuals for wda 201

Brands by name

Popular brands

Miele wda 201, Operating Instructions Manual

Search results

Summary of Contents for wda 201

Reviews:

Related manuals for wda 201

Brands by name

Popular brands