Miele WCI 660 WCS, Operating Instructions Manual

Page: 99 / 108

Settings
99
Remote control
The Remote control setting is only vis-
ible if the Miele@home setting is set up
and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your washing
machine from anywhere and start it re-
motely. You can also control it re-
motely via the
MobileControl pro-
gramme.
You can switch off the Remote control
setting if you do not want to operate the
washing machine with your mobile
device.
If Remote control is not switched on, the
app can cause the programme to be
cancelled.
Use the "delay start" function to set a
timeframe within which you want to
start the washing machine (see "Delay
start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as stand-
ard.
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier's
energy costs are most economical.
Activating
SmartGrid
gives the Delay
start sensor a new function. Use the
"Delay start" control to set the
SmartGrid . The washing machine will
then start within the timeframe specified
by you when it receives a signal from
your energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the washing machine will start
automatically (see "Delay start").
SmartGrid is deactivated as standard.