Miele WCI 660 WCS, Operating Instructions Manual

Page: 44 / 108

Programme chart
44
Outerwear cold to 40 °C Max. load 2.5 kg
Use for Performance outerwear (e.g. jackets and trousers) made from mem-
brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.
Notes – Zip up or close jackets before washing.
– Do not use fabric conditioner.
– If wished, these garments can also be re-proofed using the Proof-
ing programme. Proofing should not be done every time the gar-
ment is washed.
Proofing 40 °C Max. load 2.5 kg
Use for Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes – The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Programmes accessed via Further programmes/  on the programme se-
lector
Sportswear cold to 60 °C Max. load 3.0 kg
Use for Sportswear such as singlets and leggings as well as microfibre and
fleece garments.
Notes – Do not use fabric conditioner.
– Observe the manufacturer's care label.
Automatic plus cold to 40 °C Max. 6.0 kg
Use for Mixed loads of garments suitable for the Cottons and Minimum iron
programmes.
Note The wash parameters (e.g. water level, wash rhythm and spin speed)
are adjusted automatically in this programme to ensure the best
possible care and wash result for each item.