Miele WCI 660 WCS Operating Instructions Manual Download Page 28

Page: 28 / 108

2. Select a programme

3. Selecting programmes via the Mo-
bileControl



programme selector

position and the Miele@mobile app

Tip:

In order to use MobileControl



the washing machine must be logged
on to the WiFi network and

Remote con-

trol

must be switched on.



Turn the programme selector to the

MobileControl



position.

The following appears in the display:



Load laundry, close the door and press

"Start". Appliance can be remotely con-
trolled



Follow the instructions in the display
and start the programme.

The following appears in the display:



MobileControl 

The washing machine can now be oper-
ated with the Miele@mobile app.

Summary of Contents for WCI 660 WCS













































































































Search results

Summary of Contents for WCI 660 WCS

Reviews:

Related manuals for WCI 660 WCS

Brands by name

Popular brands

Miele WCI 660 WCS, Operating Instructions Manual

Search results

Summary of Contents for WCI 660 WCS

Reviews:

Related manuals for WCI 660 WCS

Brands by name

Popular brands