Miele WCI 660 WCS Operating Instructions Manual Download Page 27

Page: 27 / 108

2. Select a programme

Switching on the washing ma-
chine



Turn the programme selector to a
programme.

Programme selection

There are three possible ways to select
a programme:

1. Select standard programmes with
the programme selector dial



Turn the programme selector to the
required programme.

The selected programme will be shown
in the display. The standard display will
then appear.

2. Select additional programmes by
setting the programme selector to
the "Further programmes/



" posi-

tion and using the display:



Turn the programme selector to the

Further programmes/



position.

The following appears in the display:

Sportswear











Touch the



sensors until the pro-

gramme you want appears in the dis-
play.



Confirm the programme with the

sensor.

Preset programme parameters will be
displayed, depending on the pro-
gramme selected.

Summary of Contents for WCI 660 WCS













































































































Search results

Summary of Contents for WCI 660 WCS

Reviews:

Related manuals for WCI 660 WCS

Brands by name

Popular brands

Miele WCI 660 WCS, Operating Instructions Manual

Search results

Summary of Contents for WCI 660 WCS

Reviews:

Related manuals for WCI 660 WCS

Brands by name

Popular brands