Miele WCG 660 Operating Instructions Manual Download Page 8

Page: 8 / 108

Warning and Safety instructions



The washing machine can only be used by people with reduced

physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it safely and recognise and understand the con-
sequences of incorrect operation.

Safety with children



Children under 8 years of age must be kept away from the wash-

ing machine unless they are constantly supervised.



Children 8 years and older may only use the washing machine un-

supervised if they have been shown how to use it safely and recog-
nise and understand the consequences of incorrect operation.



Children must not be allowed to clean or maintain the washing

machine unsupervised.



Please supervise children in the vicinity of the washing machine

and do not let them play with it.

Technical safety



Please observe the instructions in “Installation” and “Technical

data”.



Before setting up the washing machine, check it for any externally

visible damage. Do not install or use a damaged machine.

Summary of Contents for WCG 660













































































































Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands

Miele WCG 660, Operating Instructions Manual

Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands