Miele WCG 660 Operating Instructions Manual Download Page 39

Page: 39 / 108

7. End of programme

Opening the door and remov-
ing the laundry

The door remains locked during the
anti-crease phase. The display will
change to show:

Finish/Anti-crease



Press Start button



Unlock the door either by touching
the

Start

Add laundry

sensor control

or by turning the programme selector
to the



position.

The door will unlock.

Tip:

After the anti-crease phase, the

door will have unlocked automatically.



Reach under the door grip and pull
the door open.



Remove the laundry.

Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Remove all items from the drum.



Check the door seal for any foreign
objects.

Tip:

Leave the door slightly open to al-

low the drum to dry.



If applicable, remove the used cap-
sule from the detergent drawer.

Tip:

Leave the detergent drawer slightly

open to allow it to dry.

Summary of Contents for WCG 660













































































































Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands

Miele WCG 660, Operating Instructions Manual

Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands