Miele WCG 660 Operating Instructions Manual Download Page 78

Page: 78 / 108

Installation

*
I
N
S
T
A
L
L
A
T
I
O
N
*



Risk of injury from sharp edges.

There is a risk of injury from reaching
into holes that are not covered.
Cover the holes for the transit bars
after they have been removed.



Fit the stoppers onto the two holes.



Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.



Risk of damage from incorrect

transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
moved (e.g. when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.

Summary of Contents for WCG 660













































































































Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands

Miele WCG 660, Operating Instructions Manual

Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands