Miele WCG 660 Operating Instructions Manual Download Page 26

Page: 26 / 108

2. Select a programme

Switching on the washing ma-
chine



Turn the programme selector to a
programme.

Programme selection

There are three possible ways to select
a programme:

1. Select standard programmes with
the programme selector dial



Turn the programme selector to the
required programme.

The selected programme will be shown
in the display. The standard display will
then appear.

2. Selecting additional programmes
by setting the programme selector to
“Further programmes/



” and using

the display:



Turn the programme selector to the

Further programmes



position.

The following appears in the display:

Outerwear











Touch the



sensor controls until

the programme you want appears in
the display.



Confirm the programme with the

sensor control.

Preset programme parameters will be
displayed, depending on the pro-
gramme selected.

Summary of Contents for WCG 660













































































































Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands

Miele WCG 660, Operating Instructions Manual

Search results

Summary of Contents for WCG 660

Reviews:

Related manuals for WCG 660

Brands by name

Popular brands