Programming and storing in
memory
The programmable functions are acti-
vated to call up further features not
shown on the control panel by using the
additional option touch pads in combi-
nation with the programme touch pads.
Programming is carried out in for steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate the program-
mable function
4. Save the programmable function in
memory
1. Selecting programming mode
A
The machine must be switched off
and the drum door closed.
B
Press the
Cottons
and the
Soak
touch pads at the same time, hold
pressed in and
C
. . . switch the machine on with the
I-ON/0-OFF button.
D
Let go of all these touch pads/but-
tons.
P 0
will appear in the display.
2. Selecting a programmable function
E
Press the
&
touch pad under the
display. The
P
will now flash in the
display alternating with the number
of the programmable function e.g.
P...1...P...1
F
Press the
$&
touch pads repeat-
edly until the the display shows the
number of the programmable func-
tion required, alternating with the
P
.
P1
= High water level
P2
= Water plus system
P4
= Activate compartment
i
P9
= Gentle action
P10
= Activate top-up rinse for
Cottons
P11
= Memory function
In addition, one of the following will ap-
pear on the right of the display:
P 0
= Programmable function is
de-activated
P 1
= Programmable function is
activated
with
P 2
a
2
will appear on the right to
show that option 2 is active.
Programmable functions
35
