The programmable functions enable
the user to introduce further features as
required. The programmable functions
remain stored in memory until they are
cancelled by the user.
The following programmable
functions can be selected:
P1
= Maximum water level
The water level for rinsing is automat-
ically raised to the maximum level
where rinse results are particularly
important.
Effective for the rinses in programmes:
– Cottons
– Minimum iron
– Quick Wash
– Mixed wash
P2
= Water plus system
The
Water plus
touch pad offers four
options for increasing the water level
and/or bringing in an extra rinse cy-
cle.
Option 1
Increases the rinse water level in the
Cottons
,
Minimum iron
,
Quick Wash
and
Mixed wash
programmes, where
for example rinse results are particu-
larly important.
Option 2
Increases the water level in soak,
pre-wash, main wash and rinses in the
Cottons
,
Minimum iron
,
Quick wash
,
and
Mixed wash
programmes and is
particularly suitable for fabrics that
need special care, or where extra atten-
tion must be taken in dissolving deter-
gent. This option is already set when
the machine is delivered from the fac-
tory.
Option 3
An extra rinse cycle is introduced to the
Cottons
programme, e.g. when rinse re-
sults are particularly important.
Option 4
Is Option 2 plus Option 3, where this
quality of rinse is required.
P4
= Activating the
i
compartment
For the first 10 seconds of the main
wash cycle water flows in through
compartment
i
.
Compartment
j
may sometimes not
be able to hold the total amount of de-
tergent required:
– if the water is very hard (over
3.8 mmol/l, water hardness level IV))
and
– if laundry is heavily soiled.
Compartment
i
can be used to flush
in the extra detergent for the main
wash.
Programmable functions
33
