Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons
programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the Rinse hold (
e
) setting
using the
Spin speed
button. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start/Stop
button.
– To end the programme:
Press the
Door
button. The water will
drain away. Press the
Door
button
again to open the door.
To omit rinse and interim spin and
the final spin (No
.
)
^
Select the
No
.
setting using the
Spin speed
button.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the anti-
crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.
Spinning
21
Programme
rpm
Cottons
1600
Minimum iron
1200
Delicates
600
Woollens
/
1200
Proofing
1000
Express 20
1600
Automatic plus
1200
Dark garments / Denim
1200
Shirts
600
Intensive plus
1600
Spin
1600
Separate rinse/Starch
1600
Down duvets
1200
Pillows
1200
Down filled items
1200
Curtains
600
Bathrobes
1600
Maintenance prog.
–
Hygiene
1600