Miele W 5800 HomeCare XL Operating Instructions Manual Download Page 65

Page: 65 / 72

Total usage

This gives the sum total of all energy
and water consumption.

Energy

This gives the sum total of all energy
consumption.

Water

This gives the sum total of all water
consumption.

Reset function

This resets the total consumption data
figure back to zero.

Water plus

You can increase the amount of
water used in the wash programmes.

There are four different options:

Water +

(The machine is delivered with this
option selected.)

The water level is increased in the wash
and rinse stages.

Extra rinse

An extra rinse is introduced.

Water+ & Extra rinse

The water intake is increased in the
wash and rinse stages and an extra
rinse is carried out.

Extra quiet

If using your washing machine during
quiet periods, you can reduce the
noise levels even more.

Extra quiet

is activated, the machine

will activate

Rinse hold

and not spin.

The programme duration is longer.

To deactivate Rinse hold

Use the

Spin speed

button to select the

spin speed you want.

The machine is delivered with Extra
quiet deactivated.

Programmable functions

Summary of Contents for W 5800 HomeCare XL









































































Search results

Summary of Contents for W 5800 HomeCare XL

Reviews:

Related manuals for W 5800 HomeCare XL

Brands by name

Popular brands

Miele W 5800 HomeCare XL, Operating Instructions Manual

Search results

Summary of Contents for W 5800 HomeCare XL

Reviews:

Related manuals for W 5800 HomeCare XL

Brands by name

Popular brands