I
Start the programme
^
Press the flashing
Start/Stop
button.
If a delay start time has been selected,
then this will count down in the display.
At the end of the delay start time or im-
mediately after the programme has
started (if no delay start time has been
selected) the estimated programme
duration will appear in the display.
During the first 8 minutes the machine
measures how much water is being
absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
J
Remove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
0:00
Anti-crease
and
0:00
Finish
^
Press the
Door
button to open the
drum door.
The washing machine will switch off
automatically 15 minutes after the
end of the anti-crease phase. You will
need to press the
K
button to switch
it back on again.
^
Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
^
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
^
Switch the machine off with the
K
button.
^
Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
How to wash correctly
20
